4x Ammortizzatori Sospensioni Kit compatibile per AUDI A4 B6 B7 8E compatibile per FWD 4WD Shock Coilovers Lowering Kit

Introduction

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application

Compatibile per AUDI A4 Avant (8E5, B6) 2000-2005 3 /1.9 TDI /1.8 T /2.0 FSI
compatibile per AUDI A4 Convertible (8H7, B6, 8HE, B7) (01/2002-12/2009) 3/1.8 T/2/ 2.7 TDI
compatibile per AUDI A4 (8E2, B6) (11/2000-12/2005)1.8 T quattro /3.0 quattro
compatibile per AUDI A4 Avant (8ED, B7) (11/2004-06/2008) 2 /1.6 /2.0 TFSI /1.8 T /1.9 TDI
compatibile per AUDI A4 (8EC, B7) (11/2004-06/2008)2.0 TFSI quattro/ 1.8 T quattro
note: Front OE top mounts need to be modified ( drill bigger hole for shaft)

Specification

Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 0-25mm depending on the vehicle models
Spring rate Front: 6.5 kg/mm (364 lbs/in)
Spring rate Rear: 10 kg/mm (560 lbs/in)
Spring length Front: 295mm
Spring length Rear: 208mm
Front spring inner diameter:70-71mm
Rear spring inner diameter:42-46mm
Spring Preload advised: 7-10 mm
Color: Silver body with golden spring

Package included

2x front coil-overs
2x rear coil-overs
2x C spanners

Dimension

Package Size: 71*51*21 cm
Weight：24200g

Feature

1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.