Cablaggio Interruttore 6 Luci LED RGB For maXpeedingrods Crosshair 30A+30A 12V

Applications

For maXpeedingrods Crosshair Series LED Auxiliary Driving Lights with RGB (3.5inch / 5inch / 7inch models). It supports the following Applicazione scenarios:

1. Simultaneously control both A-pillar lights (2 pairs of 3.5/5-inch lights) + 1 pair of front bumper lights (5/7-inch lights)
2. Simultaneously control 3 pairs of roof lights (5-inch lights)
With a 1-to-6 configuration, this harness can manage up to Six lights concurrently, and Its load capacity is sufficient to support 2 pairs of 5-inch and 1 pair of 7-inch.

Specifications

Operating Voltage: 10-14V
Maximum Current: 30A+30A
Dual Relay：60A
Maximum Power: 360W+360W/12V
Plug Type: 3-PIN DT Plug
Plugs Quantity: 6
Switch Type: Touch
Material: High Quality PVC + Copper Wire
Wire Gauge: 14AWG
Wire Harness Length: 3.6M+1M*2（Extension Wire）
Power Supply Way: ACC

Caratteristica
* The professionally assembled wiring harness switch more convenient to use，it can simultaneous control 6 maXpeedingrods Crosshair series RGB off-road lights ,7inch、5inch and 3.5inch all satisfy the requirement.
* Easy to install: Simply plug the matching off-road light DT plug into  the DT plug of the wiring harness，no need to DIY.
* The wiring harness kit made of high quality copper and PVC, equip with relays and high current fuses, which are more safe 、reliable and durable. 
* Made of 14AWG Wiring Harness ,the wiring harness with a total length of about 4m is flexible for mounting anywhere you want.

Package Included
1* Wiring Harness Kit

Nota
* Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
* Pay attention to the working voltage range during installation and ensure that the current passing through does not exceed the rated current.
* Does not include an instruction manual.